MOST, but not all, staining on pool surfaces is
The problem is most people don’t realize they have metals in
their water. Even trace amounts of these metals (iron, copper, manganese,
cobalt, silver) can cause staining.
In fact there’s enough copper in ONE penny to
completely stain an average sized swimming pool! Obviously, the conditions have
to be right. This is where prevention & good, proper pool care come into play.
Here’s what happens:
metals come into your pool whenever fresh, make-up water is added. They’re
dissolved in the water. Whether it’s municipal water or well water, metals
can be present.
metals accumulate, the greater the chance that they will eventually come out of
solution. Once out of solution, they make the water cloudy or worse, they
“plate out” on the pool’s surfaces & stain. Metals can come out of solution
through a variety of ways. But there’s 2 that typically happen.
When a pool is shocked whether with chlorine
or a non-chlorine oxidizer, the shock oxidizes everything in the water,
including metals. Oxidized metals become “rust” in the case of iron or “Verdigris” in the case of copper.
In the second way, metals come out of
solution or are left “exposed” when the pH, Total Alkalinity and/or Calcium
Hardness are left unchecked & allowed to go low (pH below 7.2, Total Alkalinity
below 80 ppm [non-Pristine Blue pools], Calcium Hardness below 100 ppm). The
water becomes aggressive & the metals are more susceptible to oxidation. In
many cases, pool-owners don’t properly test their water & more likely rely on
the “look” of the water (the water’s clear, everything must be alright). This
is typically the case with blonde hair turning green – low pH helps bring copper
out of solution & “plates” it out on the person’s hair! Then people blame the
chlorine! It’s the copper in the water.
When it comes to testing, remember that you
can only test for metals when they are in solution. Once oxidized, the metals
come out of solution & cannot be tested. That’s why once a metal stain has
occurred, the metal test will NOT show any metals present.
Here’s how to prevent metal stains:
Keep the water balanced. pH 7.4 – 7.6; Total
Alkalinity 125 – 150 ppm (vinyl pools), 80 – 125 ppm (plaster / gunite pools)
(Please note that these TA values ARE NOT applicable in Pristine Blue treated
pools where the TA is to be maintained at no higher than 80 ppm); Calcium
Hardness 200 – 250 ppm (vinyl pools), 225 – 275 ppm (plaster / gunite pools).
In other words, have your water professionally tested at opening, mid-season &
at closing (at least) – make sure they do a copper & iron test.
Prevent metal stains by using
PoolBoss Scale & Stain
(a sequestering agent) when filling the pool then adding a maintenance dosage
If you have well-water, treat
automatically with Jack's Magic Blue Stuff.
If you have municipal water,
Jack's Magic Blue Stuff won’t hurt.
If it’s too late & you already
the water balanced. Keep in mind that further discoloration COULD occur. This
is a temporary phenomena & will clear once the treat process is complete.
light staining of iron & copper, use
Jack's Magic Blue Stuff
at a rate of 1 qt. per 10,000 gallons of water. Blue Stuff works well
on “fresh” stains. Avoid shocking the pool for about 3 days.
Jack’s Magic Blue Stuff
is an excellent product. We like Jack’s Magic because you can have high or
higher amounts of chlorine present (in excess of 10.0 ppm). Click here for more
information treating with Jack’s Magic products.
metal staining on vinyl, fiberglass or acrylic steps can be treated with
Magic Step Stuff.
yourself time, money & effort using
Jack’s Magic Stain ID Kit. It really helps
in identifying the exact metal that’s causing the stain.
Copyright Material used by permission.